flyingw.gif (804 bytes)

flybally.gif (1350 bytes)

Pinball 2000 Technical Support

 

t-gallery.gif (1429 bytes)

t-tech.gif (1560 bytes)

t-collect.gif (1568 bytes)

t-events.gif (1405 bytes)

t-dist.gif (1410 bytes)

t-contact.gif (1618 bytes)

t-special.gif (1519 bytes)

t-employ.gif (1332 bytes)

t-home.gif (1389 bytes)

t-wms.gif (1353 bytes)


Transferring Update Manager to Another Computer using only a Floppy Drive

These instructions are to be followed if it is necessary to download the Update Manager Software onto a first computer and then subsequently transfer the Update Manager program to a second computer using 1.44 Mbyte floppy disks.

1) Download the following 3 files to your hard drive:


P2KUM_D1.EXE

Download the Pinball 2000 Update Manager - Disk 1


P2KUM_D2.EXE

Download the Pinball 2000 Update Manager - Disk 2


P2KUM_D3.EXE

Download the Pinball 2000 Update Manager - Disk 3


2) To get the program on floppy disk will require 3 disks. Each of the above files contains the files that are placed on a single disk. You will need to extract these files on your hard drive before copying them to the floppy disks. Create a separate folder for each of the above files and move each file to its own folder.

3) Double click on each file (in its own folder) to extract the contents.

4) Delete the original P2KUM_D1/D2/D3.EXE file in each folder.

5) Transfer the files from each folder to a separate floppy disk.

6) Insert the disk corresponding to P2KUM_D1.EXE in the floppy drive of the 2nd computer and "run" the setup.exe program from Drive a: (Using the "Run" command on the Windows '95 "Start Menu".)

7) Follow the on-screen setup instructions and insert the 2nd and 3rd disks when asked.

 

 

 

 

 

 

 

 

Copyright © 1999, Williams Electronics Games, Inc.