Pinball Home | Tech Support | By Game | By Date
Next | Previous | Next for Game | Previous for Game


Service Bulletin: SB 94

DATE: January 15, 1997

GAME: WPC-95 Power Driver Board

SUBJECT: General Illumination

If you see that diodes (D25 through D32) in the General Illumination circuit are getting hot and discoloring the PCB, remove the diodes and replace with zero ohm jumpers. If you don't have a zero-ohm jumper use 18-guage wire jumpers. All games now being produced will reflect this change.


Pinball Home | Tech Support | By Game | By Date
Next | Previous | Next for Game | Previous for Game