Silicon Gaming Odyssey Slot Machine

I guess "reboot" means a "Full Safe Clear" because that procedure cleared the problem.

Background: Machine was left in the middle of a Jacks or Better game when power was turned ...

Further to the last post, if I put the machine back in service via Configuration, I then get Error 5119 telling me to reboot the machine. Powering down and then up does not help. I could do a Safe Cle ...

Odyssey Manual Solution: Put Machine Back in Service.

Unfortunately, no advice is given as to what is causing the Out of Service Condition so I have no idea where to begin. Any ideas?

Many, many ...

As Robert said, it's just a matter of popping the old battery out and popping the new battery in. Removing the battery is easy. Inserting the new one required some initiative as it kept slipping from ...

My machine, acquired in DEC-01, has been working well (as in a few days ago). Today, however, when I power it up, the LED display shows 0000 and freezes, i.e., there is no boot sequence. Any ideas? Th ...

My machine, acquired in DEC-01, has been working well (as in a few days ago). Today, however, when I power it up, the LED display shows 0000 and freezes, i.e., there is no boot sequence. Any ideas? Th ...

Folks, after switching the unit with a spare a couple times, the acceptor now works. Most likely due to a bad contact (at least I hope so). I love my Odysseys (and so do my friends). I hope I can keep ...

Slot boots normally and shows 9999. Cash can registers. LEDs are green. ...but acceptor cannot "see" bills. Ideas? Thanks, Jim

According to Robert: "It appears you have lost the green gun on the monitor, a common problem. That can usually be fixed by repairing the monitor board. The video card inside the computer box i ...

Over the last little while, my yellows have gotten darker and darker until now they are almost orange. Hopefully, there is adjustment somewhere. If so, where and how do I reach it? If not, what do I h ...

Robert suggested I replace the GPIO I Box with my spare. I did and now everything works again. If anybody has a spare GPIO I Box they would like to sell, please let me know. Thanks, Jim

Some time ago the green LEDs on one of my bill validators stopped working and just recently the validator itself stopped working. I have three bill validators. They all work in my King Putt machine; n ...

My machine also limits volume adjustments to between 85% and 100%. (Apparently, Odyssey did this because the casinos were turning the volume down at night.) In my case, I disconnected the top speaker ...

After, over six years, my touchscreen, which was working well in Top Hat, just simply quit when I went back to the Game Menu. I followed Robert's advice below and, much to my pleasant surprise, my tou ...

I ordered several from Happ Controls. You can even special order them to be keyed alike. Here's the link:

http://www.happcontrols.com/security/302201xxx.htm