cairndhu1
Joined: 17 Oct 2005 Posts: 19 Location: Tucson, AZ
|
Posted: Sat Oct 20, 2007 4:06 pm Post subject: Bill Acceptor LED Display is Very Faint |
|
|
Folks, in calibration mode with a jumper across the two center pins, my Bill Acceptor LED displays a rectangle of bright red LEDs as it should. After calibration, only two faint green LEDs on the left and another two on the right light up instead of the rectangle of the usual bright green LEDs. The unit still accepts bills but, being a perfectionist, I would really like to get those green LEDs to light up.
Any ideas on why the LEDs don't display in a bright green rectangle? Thanks in advance, Jim White. _________________ Jim White
Tucson, AZ |
|