View previous topic :: View next topic |
Author |
Message |
wardthomas
Joined: 02 Nov 2005 Posts: 22 Location: McAllen TX
|
Posted: Sat Nov 03, 2007 9:31 pm Post subject: Button Lights |
|
|
I have 2 of them burned out on one of my machines. Does anybody know if they can be taken apart to replace the bulbs? |
|
Back to top |
|
|
robertwinter Site Admin
Joined: 05 Aug 2005 Posts: 94
|
Posted: Sun Nov 04, 2007 3:54 pm Post subject: |
|
|
Yes, they can be taken apart. You need to open the monitor bezel/frame. The white back part of the button with the switch and bulb snaps into the front piece. It can seem difficult to remove, but if you grab the back of the switch assembly and angle it slightly away from the button, it should snap out of the front piece. Make sure you're holding the entire white piece and NOT the microswitch when you're doing this.
Once you have that out, just pull out the bulb, replace with a new one, then push the assembly back in. It does take some force to do, but it should snap in place with a nice click.
It's easiest to do this with the button still firmly mounted on the chrome bezel. _________________ Robert
http://www.robertwinter.com/slot/odyssey |
|
Back to top |
|
|
wardthomas
Joined: 02 Nov 2005 Posts: 22 Location: McAllen TX
|
Posted: Sun Nov 04, 2007 4:17 pm Post subject: |
|
|
Thank You, That worked and I got them all fixed. I tried this before but I was afraid I was going to break them. |
|
Back to top |
|
|
|