View previous topic :: View next topic |
Author |
Message |
troy
Joined: 03 Mar 2010 Posts: 5 Location: Dayton, OH
|
Posted: Wed Apr 06, 2011 11:21 pm Post subject: 9999 then 5507 |
|
|
boots to 9999 then i get 5507 error? any one? i did a full clear to 4000 then reset dips then got this 5507 and cant go any further |
|
Back to top |
|
|
robertwinter Site Admin
Joined: 05 Aug 2005 Posts: 94
|
Posted: Tue Apr 26, 2011 1:04 am Post subject: |
|
|
More than likely a Psycho board issue. I would suspect the DS1245Y SRAM. But try pulling all the socketed chips (EPROMs, EEPROM and SRAMs) and re-inserting them to help get a better connection.
If that doesn't help, try reburning the images on the EPROMs/EEPROM first if you have access to a burner. There are images for each in the Tech Support section. I can also sell you known good chips if you like.
Failing that, get new SRAM chips from Digikey. They're about $20 each.
After each step above, try the 4/6 Safe Clear before proceeding.
Robert _________________ Robert
http://www.robertwinter.com/slot/odyssey |
|
Back to top |
|
|
troy
Joined: 03 Mar 2010 Posts: 5 Location: Dayton, OH
|
Posted: Thu May 12, 2011 1:45 pm Post subject: |
|
|
I have found a 2nd type 1 psycho board but it had a different bios chip, thought id try swapping them and it did work however i'm now getting a 736 error code, is this related or a new problem? |
|
Back to top |
|
|
robertwinter Site Admin
Joined: 05 Aug 2005 Posts: 94
|
Posted: Thu May 12, 2011 6:49 pm Post subject: |
|
|
736 is a bill acceptor CRC error. This is probably because the Config EEPROM is corrupt or set for a different bill acceptor.
If you have a Mars ZT1101US bill acceptor, try downloading the valid EEPROM image from my site (http://www.robertwinter.com/slot/odyssey/tech_roms.htm) and reburn the chip. _________________ Robert
http://www.robertwinter.com/slot/odyssey |
|
Back to top |
|
|
troy
Joined: 03 Mar 2010 Posts: 5 Location: Dayton, OH
|
Posted: Thu May 12, 2011 9:00 pm Post subject: |
|
|
I don't have a burner, can you recommend a good one that will be easy to use? |
|
Back to top |
|
|
robertwinter Site Admin
Joined: 05 Aug 2005 Posts: 94
|
Posted: Thu May 12, 2011 11:40 pm Post subject: |
|
|
I can't recommend any specific burner since I haven't bought one in years.
If you want to send the chip my way, I could reburn it for you free of charge (you just pay shipping both ways). Or I could sell you a known good chip. _________________ Robert
http://www.robertwinter.com/slot/odyssey |
|
Back to top |
|
|
|