View previous topic :: View next topic |
Author |
Message |
wardthomas
Joined: 02 Nov 2005 Posts: 22 Location: McAllen TX
|
Posted: Tue Apr 21, 2020 1:39 am Post subject: 9000 or 977 or 5000 |
|
|
Can not get a Full Safe Clear. Stops at 977 then after a turn of the reset key it goes to 9000 and stops. Rebooted several times and always gets the same results. Flipped the Full Safe Clear switch back and it boots to 9999 and then Out of Service. When I turn the Reset Key it freezes with MMS on the screen and 5000 is the error code. Any ideas?? |
|
Back to top |
|
|
robertwinter Site Admin
Joined: 05 Aug 2005 Posts: 94
|
Posted: Mon Oct 26, 2020 11:37 pm Post subject: |
|
|
Did you get this working?
If not, I would suspect either your Psycho board or corrupt/bad hard drive. _________________ Robert
http://www.robertwinter.com/slot/odyssey |
|
Back to top |
|
|
wardthomas
Joined: 02 Nov 2005 Posts: 22 Location: McAllen TX
|
Posted: Tue Jan 12, 2021 4:32 am Post subject: |
|
|
I got it working but it will stay running for several minutes but then goes to Out of Service with error codes 7079 and 7000. Can't seem to figure out why that is happening. Rebooting makes it go away but it will do it again in about a half hour. |
|
Back to top |
|
|
kb5zcr
Joined: 16 May 2006 Posts: 2
|
Posted: Mon Sep 06, 2021 3:52 am Post subject: |
|
|
McAllen Tx??? Cool
I grew up in Mission. Now I'm up in Ft Worth area. |
|
Back to top |
|
|
|