Big Bang Bar

I put al the stuff from pinbits
Tube rings
Pop bumper rings
danser rings up and down
hole protector

http://img111.imageshack.us/img111/551/img0041xu2.jpg How can anyone NOT like the look of tha ...

I appreciate that Al. And yeah, I know we're all friends here. Thats why I think we can all feel free to share so openly Smile

My frustration comes from a drive to do things right... the first time. Tha ...

Unfortunately the rubber bands will deteriorate and snap in fairly short order. The rings should have been made a friction fit, as are ours. You could use a dab of clear silicone as it is removable. U ...

Cliffy
Mine wouldn't fit right either. It did not come with the two washers. I had to use a dime sized washer for the post attached the the ball guide and another small washer under the ball guid ...

The only differences I can think of will be the wood screw hole for the ball guide and possibly the thickness of the clear topcoat on the inside edges of the routing. As you can see on my web page the ...

Well I'm at a loss here. I make these things and fit them to a laser cut template before they go out but if they aren't fitting I don't know what else to do. Refunds all around, I suppose Smile

Sorry guy ...

The protectors are all laser cut so they are all the same. However, when I make the tab bends they can vary as I do them in a brake by hand. If I've bent them too tight, ie, too close to the hole edge ...

(this topic has been moved/expanded by the Admin)

Martin and I would like to know what color florescent rings you guys would like to see. There is the obvious orange whhich you have all seen but th ...

Cliffy,

All of these items look great, Martin's Web Site indicated they are all sold out. Will there be more or did I miss out?

Tom
BBB #136

No one will miss out, Tom Smile

We just have to mak ...

Cliffy and Martin,

Welcome to the site... great to have you here. Nice stuff too Smile

Howza bout some mylar for the drop targets - don't forget the underground Wink

and spinner and a couple ...

Can all the new parts (when completed) be purchased as a kit from Pinbits?

Also any plans on making a mylar kit for high wear areas??

I believe Martin wants to make a kit of all items and yes, ...

It will occur no matter what, sadly. Look at any modern pinball and you'll see dimpling. If the clear itself doesn't dimple (varathane) then the plywood will. This is all attributed to the ball becomi ...

Yes the ball can certainly get stuck and as you discovered the ball can get stuck on the tube even without the rings! We proposed a slanted sheet to go over the top of the rings but every single perso ...

Hey Guys,

Glad to have you on board.

k

Thanks, Kim. Please tell us we have good news from Kati's doctor? Smile

and here's the pic with ALL rings on Smile

http://www.passionforpinball.com/BBBmods/cliffy_martin_BBBmods1.jpg