View previous topic :: View next topic |
Author |
Message |
sellenoff
Joined: 07 Aug 2005 Posts: 101
|
Posted: Mon Jun 18, 2007 6:49 am Post subject: New problem - ball getting stuck in left loop at switch |
|
|
My game has developed a new and very annoying problem. Many times the ball will get litterally stuck at the switch on the left orbit loop shot right behind the spinner.
Shaking the game most times will not dislodge it, it is stuck side rail to side rail really tight!!
More annoying is that you can't get to the spot since the green tube and the ramp are in the way (and I don't feel like taking them off the PF yet).
Anyone seen this happen and have suggestions?
I can't imagine this is a leveling problem, but I will recheck it tonight.
The other thought is that the switch is somehow slightly bent and causing the problem, but I can't see how that would cause this.
I've not noticed the problem occur from the ball come down the left orbit from a right orbit to left shot, only going up it.
How much clearance is there on the left orbit. When the ball is stuck there, it looks like there's literraly just enough space for a ball, which seems far too narrow of course. |
|
Back to top |
|
|
Kerry Richard
Joined: 02 Aug 2005 Posts: 101
|
Posted: Mon Jun 18, 2007 7:09 am Post subject: |
|
|
I had a similur problem w/ switch in upper right corner. I simply lifted the playfiled, removed 2 screws to remove switch, bent the wireform and made sure it was not touching the wood side any longer. Problem solved.
Kerry #111 |
|
Back to top |
|
|
jadziedzic
Joined: 02 Aug 2005 Posts: 151 Location: Nashua, NH USA
|
Posted: Mon Jun 18, 2007 7:33 am Post subject: |
|
|
Lift the playfield and check the orbit switch mounting bracket. The underground switch on my game was missing one of the two #2-56 screws that mount the microswitch to the bracket, which allowed the switch to rotate upward and block free passage of the ball only in one direction. (The ball was hitting the edge of the switch wireform where the wire bends downward sharply.) It's possible the orbit switch on your game is similarly screw challenged.
Tony _________________ Joseph "Tony" Dziedzic
BBB #39 |
|
Back to top |
|
|
sellenoff
Joined: 07 Aug 2005 Posts: 101
|
Posted: Mon Jun 18, 2007 11:31 am Post subject: |
|
|
Thanks guys! I'll check it tonight and see what I find out. |
|
Back to top |
|
|
sellenoff
Joined: 07 Aug 2005 Posts: 101
|
Posted: Tue Jun 19, 2007 10:09 am Post subject: |
|
|
Was just messing with it, and the screws are all there tight and fine. The switch doesn't appear to touch the wood, though it does have a lot of play so it could probably jump from side to side easily.
I tried bending a bit, but no change..
Game is still getting balls stuck there..
Really sucks and i'm getting rather annoyed since it's no fun to play now, and I don't know what else to try.. |
|
Back to top |
|
|
Lloyd Olson
Joined: 02 Aug 2005 Posts: 25 Location: Hopkins, Minnesota
|
Posted: Tue Jun 19, 2007 12:33 pm Post subject: |
|
|
You'll need to tweak the wire that triggers the switch more, or put a different shaped one on it, ( like a Williams shooter lane one ) and be sure the micro mini switch is the kind that depresses easy not hard, there are different kinds of them. |
|
Back to top |
|
|
|