 |
Big Bang Bar
Forum hosted by Robert Winter
|
| View previous topic :: View next topic |
| Author |
Message |
CraigC
Joined: 03 Aug 2005
Posts: 209
|
 Posted: Tue Jul 10, 2007 6:17 am Post subject: |
 |
|
I have a ton of things going on so i cant dig up part numbers at the moment.
but i'd like:
playfield
7 drop targets
flipper pawls and coil stops x3
main ramp
plastic set.
-c |
|
| Back to top |
|
 |
pinfixer
Joined: 21 Aug 2005
Posts: 1
|
| Posted: Tue Jul 10, 2007 9:54 am Post subject: |
|
|
I would like to purchase the following:
(1) Unwired Playfield
(2) sets of drop target decals
(2) Spinner Decals
(1) Plastics Set
(1) Decal Set
(1) Ramp arrow photolumanescent assy
(1) Ramp
(1) Tube Dancer
(3) Sets of flipper pawls and coil stops
(3) Flipper Coils
(1) RH Flipper Switch (mounted in cabinet)
Thanks
John |
|
| Back to top |
|
|
Walter
Joined: 02 Aug 2005
Posts: 15
Location: San Jose, CA
|
| Posted: Tue Jul 10, 2007 10:10 am Post subject: |
|
|
I'd like to get the following parts:
(3) A-00374...............Assy, Ring, Star Bumper
(4) A-00583-FGT........Target, Stand Up, Rectangle, Green
(2) A-00585-FGT........Target, Stand Up, Round, Green
(1) AW-00187-1>10...Decal Sheet, Drop Target & Spinner
(1) AW-00187-11>15 Decals, Apron & Flipper
For this one I really just want the Flipper Decals
(1) AW-00186............Plastics sheet, pfld plastics
(2) CL-00109.............Coil, general purpose, 15 per game
(2) CL-00111.............Coil, Flipper, 3 per game
(3) FB-00104.............Link, Fiber, Star bumper
(5) 5LP-001800...........Lamp, #1816, Flasher, Dance Floor & Lower Lock
( PL-00325-W.........Target, Drop, White
(1) RB-00126.............Figure, Tube Dancer, Green
(1) Touch-up Ink
(2) Flipper Service Kits
(1) Bare Playfield
(1) Flyer
(1) Purple Powder coat lock down bar
(1) Key FOB 
Thanks,
Walter |
|
| Back to top |
|
|
tcat
Joined: 03 Aug 2005
Posts: 30
|
| Posted: Tue Jul 10, 2007 12:30 pm Post subject: |
|
|
Hello Fred,
Please put me down for the following:
(2) A-00374 Assy, Ring, Star Bumper
(4) A-00583-FGT Target, Stand Up, Rectangle, Green
(2) A-00585-FGT Target, Stand Up, Round, Green
(2) AW-00187-1>10 Decal Sheet, Drop Target & Spinner
(1) AW-00187-11>15 Decals, Apron & Flipper
(3)CL-00109.............Coil, general purpose, 15 per game
(3)CL-00111.............Coil, Flipper, 3 per game
(1) AW-00186 Plastics sheet, pfld plastics
(3) FB-00104 Link, Fiber, Star bumper
(10)LP-001800...........Lamp, #1816, Flasher, Dance Floor & Lower Lock
(1) PL-00321 Plastic, Ramp, Main
(6) PL-00325-W Target, Drop, White
(1) RB-00126 Figure, Tube Dancer, Green
(4) A-004291R Assembly, Plunger/Link/Clamp - Right
(2) A-004291L Assembly, Plunger/Link/Clamp - Left
( PL00132-05 Sleeve, Coil 2.218 L
(3) A-0078-1 Assembly, Bracket, Coil Stop
(1) Flyer1 ea Touch-up Ink
(3) Flipper Service Kits
Thanks!
Harold
BBB #132 |
|
| Back to top |
|
|
jadziedzic
Joined: 02 Aug 2005
Posts: 151
Location: Nashua, NH USA
|
| Posted: Tue Jul 10, 2007 5:22 pm Post subject: |
|
|
Here are some additions to TOG's list that might be worth considering for long-term maintenance of these games (this is not my list - I'll type that in later):
A-00135-1 Assembly, plunger/link & clamp (diverters)
A-00147 Assembly, sub, plunger & tip (kickback, ball ejector)
A-00217-BK Assembly, flipper bat, black
A-00329 Assembly, plunger/link (slingshot)
A-00369 Assembly, plunger & tip (ball trough)
A-00573 Assembly, coil (power gate)
FB-00104 Plunger, link, fiber (star bumper)
MR00108 Motor, 12 VDC, 65 RPM (aliens and tube dancer)
MT00379 Plunger, link, metal (star bumper) *
PL00150 Link, plunger (diverter)
PL00132-01 Sleeve, coil, 1.745" long (star bumper)
PL-00229-P Skirt, purple (star bumper)
PL00246 Link, plunger (slingshot)
SG00117 Spring, ext, 0.250" x 0.440" long (drop target return)
SW00106 Switch, micro, with actuator (drop targets)
* In my experience I've seen more broken metal bumper links than fiber links
ADD to flipper rebuild kits:
PL00264-1 Bushing, flipper
SG00111 Spring, ext, 0.240" x 0.834" long
_________________
Joseph "Tony" Dziedzic
BBB #39 |
|
| Back to top |
|
|
kirklake13
Joined: 21 Jun 2007
Posts: 53
Location: NW New Jersey
|
| Posted: Wed Jul 11, 2007 12:01 pm Post subject: Part numbers? |
|
|
I must be missing something and I'd like someone to tell me what I missed. Fred's request for spare parts lists the main ramp and the ramp intersection as part #'s PL-00321 & PL-00322. Owners have used these part numbers when submitting their requests. I was going through the manual to make sure I wasn't missing something and the part numbers for these two ramps are different. Main ramp is A-00513 and ramp intersection is A-00519, page 114. Are these the same parts? Are Fred's numbers replacement numbers? captkirk BBB#78
_________________
BBB #102 |
|
| Back to top |
|
|
trrekman9
Joined: 07 Aug 2005
Posts: 1
|
| Posted: Wed Jul 11, 2007 2:52 pm Post subject: |
|
|
Here are my choices:
Spare Parts:
2- A-00583-FGT........Target, Stand Up, Rectangle, Green
3- A-00585-FGT........Target, Stand Up, Round, Green
1- AW-00187-1>10...Decal Sheet, Drop Target & Spinner
1- AW-00187-11>15 Decals, Apron & Flipper
3- CL-00109.............Coil, general purpose, 15 per game
3- CL-00111.............Coil, Flipper, 3 per game
2- LP-001800...........Lamp, #1816, Flasher, Dance Floor & Lower Lock
1- Touch-up Ink
6- Flipper Service Kits
Ken.......BBB #57 |
|
| Back to top |
|
|
runner1717
Joined: 02 Aug 2005
Posts: 163
Location: Nebraska
|
| Posted: Wed Jul 11, 2007 3:49 pm Post subject: |
|
|
TOG,
I'm in for most, if not all the replacement parts but I want to wait until you put together a comprehensive list of ALL the parts that are going to be offered.
_________________
Mike
#61 |
|
| Back to top |
|
|
The Other Guy
Joined: 04 Feb 2006
Posts: 77
|
| Posted: Wed Jul 11, 2007 4:46 pm Post subject: Re: Part numbers? |
|
|
| kirklake13 wrote: | | I must be missing something and I'd like someone to tell me what I missed. Fred's request for spare parts lists the main ramp and the ramp intersection as part #'s PL-00321 & PL-00322. Owners have used these part numbers when submitting their requests. I was going through the manual to make sure I wasn't missing something and the part numbers for these two ramps are different. Main ramp is A-00513 and ramp intersection is A-00519, page 114. Are these the same parts? Are Fred's numbers replacement numbers? captkirk BBB#78 |
You are correct! The numbers are different.
The manual spec's the entire ramp assembly (A-00513 Assembly, Ramp, Main), which includes switches, wires, brackets, other plastics, etc.
The base plastic ramp is PL-00321. This is the actual plastic that is the ramp. This is usually what is offered as you take the hardware from your broken ramp and install it to your new ramp.
The ramp intersection is similar...
Make sense???
_________________
"BBB 77" |
|
| Back to top |
|
|
kirklake13
Joined: 21 Jun 2007
Posts: 53
Location: NW New Jersey
|
| Posted: Wed Jul 11, 2007 5:12 pm Post subject: |
|
|
Fred, that makes sense to me. I'll post my full request list soon. Thanks.
captkirk - BBB #78
_________________
BBB #102 |
|
| Back to top |
|
|
The Other Guy
Joined: 04 Feb 2006
Posts: 77
|
| Posted: Wed Jul 11, 2007 5:22 pm Post subject: |
|
|
| runner1717 wrote: | TOG,
I'm in for most, if not all the replacement parts but I want to wait until you put together a comprehensive list of ALL the parts that are going to be offered. |
The intent for this thread is to see what you (BBB owners) want for spare parts.
Being a maintenance technician, I personally think that if you have a machine running, there should be enough spare parts in the closet to completely rebuild it at least once. Yes, that would include a spare cabinet and complete wiring harnesses too!
This, however, is not practical. Reality suggests that you pick the parts you think you will probably need and have a couple on hand...
I could waste the time to list every single part in the machine, make a chart to track what people want, and end up not really using 95% of that chart.
Or, I could ask you what you want, see how much it will cost to make all those parts (that we don't have) and then take orders and make the parts...
If anyone has a better idea, I'm game!
tog
_________________
"BBB 77" |
|
| Back to top |
|
|
kirklake13
Joined: 21 Jun 2007
Posts: 53
Location: NW New Jersey
|
| Posted: Wed Jul 11, 2007 5:34 pm Post subject: Here's my list. |
|
|
Thanks Fred,
Here's my request for spare parts. Most of what you had listed plus a couple of others I'd like to see. If as you put this all together you come up with other essentials, Im sure I'd add the game quantity of those too.
For now here's the list:
Qty Part #/Description
4 A-00583-FGT Target , Stand Up, Rectangle, Green
2 A-00585-FGT Target, Stand Up, Round, Green
3 A-00374 Assy, Ring, star Bumper
2 AW-00187-1>10 Decal Sheet, Drop Target & Spinner
1 AW-00187-11>15Decals, Apron & Flippers
1 AW-00186 Plastics Sheet, plfd plastics
3 CL-00109 Coil, general purpose
3 CL-00111 Coil, flipper
2 A-00573 Gate Assembly Coil
1 PL-00321 Plastic, Ramp, Main (incl. ribbon arrow lights)
1 PL-00322 Plastic, Ramp, Intersection
3 FB-00104 Link, Fiber, Star Bumper
8 LP-001800 Lamp, #1816, Flasher, Dance Floor & Lower Lock
8 PL-00325WTarget, Drop, White
1 RB-00126 Figure, Tube Dancer, Green
1 A-00651 Tube Lady Assembly, Tube
1 MR00108 Motor, 12VDC, 65 RPM
3 MT00379 Plunger, Link, Metal, Star Bumper
3 PL-00229-PSkirt, Purple, Star Bumper
3 PL00265 Body, Star Bumper
3 A-00217-BKAssembly, flipper bat, black
3 Flipper Service Kits
1 Touch-Up Ink
1 Cabinet & Head Decals (set)
1 BBB Flyer 
Thanks for doing this.
captkirk BBB#78
_________________
BBB #102 |
|
| Back to top |
|
|
gary66
Joined: 08 Aug 2005
Posts: 4
|
| Posted: Thu Jul 12, 2007 12:45 pm Post subject: |
|
|
1) Playfield
2) Plastic Set
3) Spare Flipper Coils, Sleeves
4) Tube Dancer, Natural Color
5) Lock Down Bar, Damaged finsh in transit to house
6) Main Ramp
7) Drop targets
....
These are a few off the top of my head. Thanks Gary |
|
| Back to top |
|
|
metallik
Joined: 03 Aug 2005
Posts: 99
|
| Posted: Thu Jul 12, 2007 1:29 pm Post subject: |
|
|
| I'd be in for a flesh colored tubedancer and a playfield IF those are going to be made. I left them off originally because I was only using the list TOG provided. Sideart too, if I didn't list it already |
|
| Back to top |
|
|
sellenoff
Joined: 07 Aug 2005
Posts: 101
|
| Posted: Thu Jul 12, 2007 8:10 pm Post subject: Common Capcom easy break parts? |
|
|
How bout some current Capcom owners chime in on what parts are common that wear / break and are hard to replace? I'm thinking more in terms of circuit board related stuff, but it can also apply to playfield parts..
PS - I'm in for the obvious break parts like most others such as drop targets, plastics, and other stuff like that, as well as flipper parts.. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
