View previous topic :: View next topic |
Author |
Message |
litz
Joined: 05 Aug 2005 Posts: 16
|
Posted: Sat Jan 21, 2006 5:12 pm Post subject: A few questions to Kim about nameplates....... |
|
|
I believe a few of these questions were asked in the previous forum but don't recall if they were answered or not.
Have the nameplates been ordered? If not ordered or filled in can changes be made to the info we provided?
Will the serial number and DOM be stamped on or in the machine in a location that Capcom normally uses (wherever that is)?
Will we have the option of receiving the plate uninstalled, or is that the plan?
Please describe the nameplate if possible (size, material, finish, etc).
And thanks again to all the BBB crew that have worked so hard to make this project possible. _________________ Ken S |
|
Back to top |
|
|
PINBALL WITCH
Joined: 03 Aug 2005 Posts: 166
|
Posted: Mon Jan 23, 2006 7:12 pm Post subject: |
|
|
Yes - they are at the engravers.
Game number will be inside the machine.
where are they usually at on the capcom games?
The plate will be installed with double sided tape in case someone wants to remove it. They will all say Big Bang Bar and the game # plus whatever was requested.
Brass - brass plated not sure - the size of an instruction card - and they will be "coated" so they won't oxidize.
Gene is trying to answer my questions while he is driving and i keep losing him.
sorry for the spelling time to go home.
good nite.
kim |
|
Back to top |
|
|
|