View previous topic :: View next topic |
Author |
Message |
harrrrrrr
Joined: 02 Aug 2005 Posts: 136
|
Posted: Sun Jun 03, 2007 7:33 am Post subject: Setup Notes |
|
|
Thought I'd start a thread for general setup comments.
BBB home safe and unpacked but can't mount legs as the leg mounting plate was missing from the back left corner . I will try to find one locally. LTG or one of the MN group may be able to help out on a Sunday Also, the lock on the backbox won't open key 1001 used on the coindoor (partial coin mechs? were a nice surprise, I was expecting a blank door) ). Will try to find the security star type allen wrench today... to remove the backbox lock. I expect I have mismatched locks... seems #7 wasn't so lucky. Can anyone tell me what key #'s they have? If there are numbers other than 1001... which I expect is the case... then probably a mismatch.
I also noticed some very light scratching on the playfield... anyone else see this? No big deal... just curious.
Was a great day seeing the crew at IPB. Can't wait to get legs on and the backbox open (to check things before firing her up).
John
Last edited by harrrrrrr on Sun Jun 03, 2007 11:01 am; edited 1 time in total |
|
Back to top |
|
|
BBB93
Joined: 06 Aug 2005 Posts: 142
|
Posted: Sun Jun 03, 2007 7:55 am Post subject: |
|
|
John, on my machine, the coin door key is #1001. The keys to the back box have a different number and were hanging on a hook inside the coin door. Mine did not have any coin mechs... yours did? I don't really need them, so no big deal. I thought that the coin mech had been dropped... But I did have all 4 mouinting plates.
When setiing up the game, the only thing I really had to tweak was one of the playfield supports. When we first set it up, the ball kept rolling heavily to the right side. I ended up having to tweak the left side support bracket. The support bracket that screws to the payfeild was catching on the roller track when the playfield was lowered, and was making the playfield "lift" slightly so that the left side was sitting in the cabinet about a 1/4" or so higher than the right. Had to reposition the playfield support bracket in about a 1/4", so it now clears the roller track, and the playfield sits nice and level in the cabinet. Not a big heal, but had us scratching our heads for a while trying to figure out why the playfield was not sitting level.
The games look great and they play so smooth. Hope you get yours set up today!
Bob S
BBB93 _________________ Belly-Up To The Big Bang Bar © |
|
Back to top |
|
|
harrrrrrr
Joined: 02 Aug 2005 Posts: 136
|
Posted: Sun Jun 03, 2007 8:17 am Post subject: |
|
|
Doh... of course. I actually thought to look for the keys and of course they were hangin on the coindoor... doh. Couldn't get online fast enough to edit my newbie post. I've only had 1 other NIB pin and should have known. I will also correct my bad habit of not keeping the backbox keys on the coindoors of my other games. It's about time I figured out that's where they belong
Yeah, the coinmechs were a surprise to me... maybe ol #7 is showing it's lucky side.
The backbox key was my real concern... the leg mount plate will be easy to get. We can always play briefly (not the best cooling) at ground level
Thanks Bob.
John |
|
Back to top |
|
|
harrrrrrr
Joined: 02 Aug 2005 Posts: 136
|
Posted: Sun Jun 03, 2007 11:05 am Post subject: |
|
|
I looked at the coindoor a bit more closely and yes it has the coin slots and buttons but no it does not have the metal housing that fits in between the upper and lower arms... if that makes sense. So I guess these may be partial coin mechs or maybe this is the way all coin doors are made and you add the central coin box piece. I was expecting just a blank door with no coin access. Sorry for the confusion... we won't be using coinage anyhow.
harrrrrrr |
|
Back to top |
|
|
The Other Guy
Joined: 04 Feb 2006 Posts: 77
|
Posted: Sun Jun 03, 2007 12:47 pm Post subject: |
|
|
As for the coin doors:
The doors are set to accept the coin mech's. The actual mech's are not there. The shoot is on the top and the credit switch and return shoot are on the bottom. The mech goes in between... Almost any mech should fit.
Missing leg bolt plates:
Guess I missed not seing that. _________________ "BBB 77" |
|
Back to top |
|
|
irbgolfin
Joined: 03 Aug 2005 Posts: 34
|
Posted: Sun Jun 03, 2007 12:48 pm Post subject: Missing Flipper Coil Sleeve! |
|
|
Well, after playing a few games and remarking on how one flipper just WAS NOT RIGHT... got to looking, and it turns out there was no coil sleeve. Had to hack another one I had to make it work, but all is well. |
|
Back to top |
|
|
|