Big Bang Bar

[RatherPlayPinball]

As with any new-in-the-box game, some tuning might be needed. (Not to be interpreted as a complaint, just need some help with some items.)

- There are some black foam bumpers on the playfield that have a peel off film layer - that is already curling and it seems obvious that you should peel the film layer off. But removing the film reveals a black foam that seems sticky. Is this normal?

- One switch (B for Brawl at the top is not working.) Nothing obvious, but I'll keep exploring.

- The 4" BBB logo / sticker on the apron has several large air bubbles in it. Pressing on the bubbles does not make them go away.

- When I open the coin door, it goes into the menu system. Down below, it says something like Info 0, errors 1 - how do you see what it wants? Going into the message area does not reveal what the message/error might be.

- Found a ball trap. Upper right part of playfield, near the single drop target - there is a large enough hole for ball to go into the area under the plastics. Ball search does not let it go.

Any help / suggestions appreciated. What little adjustments have you found?

Jack - #58

[BBB94]

I have not gotten to my playfield area yet, so can't help with the black foam yet.

For the air bubbles: if it were mine I would take a sharp needle and poke them and try to push them down from the outside in.