Big Bang Bar

[rhayes1]

1) Leg bolts didn't go in to the leg plate easily on about half the bolts. Tapping of the threads in the leg plate seemed to do the trick. An easy fix.

2) T-nuts for the speaker on the bottom - 1 missing, 2 loose and 1 tight. An easy fix.

3) Translight stuck in backbox. Gentle pressure by a second person to slightly widen the back box allowed the translight to be removed and replaced easily. Will probably need a second person any time translight is removed. An easy fix.

4) Backbox hinge bolts loose on the right side. An easy fix

5) Difficulty aligning/inserting backbox bolts. An easy fix.

6) 1" black rubber ring broken. Under the plastic on the right side of the game, below the BAR flipper. Probably cut/damaged during installation by the metal ball guide to the right of the hole. An easy fix.

7) 1 Bulb out. Minor.

8) A scratched/scuffed lockdown bar. It is scuffed through the black paint to the metal on the top on the left side of the bar. Scuffed on the right, but not through the paint. Disappointing but certainly not a big issue.

9) No Rules card for the apron.


Changes and adjustments -

1) Added mylar by the ball drops from the rails.

2) Added mylar by the kickout hole.

3) Steep game pitch. Alien ball locks drop balls out perfectly.

4) Set flipper strength to 9.

5) Increased volume.

6) Turned off buy-in.

7) Installed head bolts.

Game plays better than I remembered or expected.
What an excellent job gy Gene and Georgianna and company.

Thank you. Thank you. Thank you!

Rob Hayes
BBB #18

[rhayes1]

That smiley face is supposed to be an 8. I am not smiling about that lockdown bar.

How do I remove that?

Robert Hayes
BBB #18.

[BBB94]