View previous topic :: View next topic |
Author |
Message |
sellenoff
Joined: 07 Aug 2005 Posts: 101
|
Posted: Thu Jun 07, 2007 11:25 am Post subject: Black foam pieces? |
|
|
How many black foam pieces are installed on your machines?
2 ?
3 ?
I know of 2 games (mine and Jon's) that had only 2 pieces installed (left orbit, left side of ray's ball buster).
I also saw Al's game which had a 3rd rubber piece, installed below the Dartz kickout hole. Incidentally Al's rubber was not installed on Ray's ball buster side, but was sitting in the middle of the PF with backing not yet removed.
I'd like to hear from y'all what you got, and I'd like an official TOG answer as to what was supposed to be installed.. |
|
Back to top |
|
|
CraigC
Joined: 03 Aug 2005 Posts: 209
|
Posted: Thu Jun 07, 2007 11:32 am Post subject: |
|
|
3. left orbit. left of busters. right of dartz |
|
Back to top |
|
|
rhayes1
Joined: 03 Aug 2005 Posts: 31
|
Posted: Thu Jun 07, 2007 11:34 am Post subject: |
|
|
2 foam pieces.
According to page 116 in the manual these are No. 12 and 13. No. 12 is to the right of Ray's Ball Buster and No. 13 is at the bottom of the entrance to the left orbit.
Robert Hayes
BBB#18 |
|
Back to top |
|
|
The Other Guy
Joined: 04 Feb 2006 Posts: 77
|
Posted: Thu Jun 07, 2007 6:00 pm Post subject: |
|
|
Yep, should be three rubber pads.
Entrance to LH Outer Orbit, Left side of Ray's Ball Buster & Below UR Flipper. _________________ "BBB 77" |
|
Back to top |
|
|
rhayes1
Joined: 03 Aug 2005 Posts: 31
|
Posted: Thu Jun 07, 2007 6:42 pm Post subject: |
|
|
How do I get a 3rd piece of the proper foam pad to install below my upper right flipper?
Rob Hayes
BBB #18 |
|
Back to top |
|
|
BBB94
Joined: 02 Aug 2005 Posts: 407 Location: WI, USA
|
Posted: Thu Jun 07, 2007 9:07 pm Post subject: |
|
|
I got all three. The middle (RBB one) did not have a sticky front like the other two, so I did not change it. |
|
Back to top |
|
|
|