View previous topic :: View next topic |
Author |
Message |
PL
Joined: 27 Nov 2005 Posts: 9
|
Posted: Tue Jun 19, 2007 8:43 pm Post subject: Lockdown bar question |
|
|
Mine is loose and has no screws on the plate it mounts to. Usually games have a screw on each side you adjust? |
|
Back to top |
|
|
Cliffy
Joined: 18 Jun 2007 Posts: 25 Location: Bay Area Cal
|
Posted: Tue Jun 19, 2007 9:04 pm Post subject: |
|
|
Not that I have an answer for you on that one (but I agree, most games have two leveling screws for the lockdown bar but Capcoms do NOT) but I do want to suggest something else to protect your games. Put a strip of 1/4" x 1/4" dense foam weatherstripping tape inside the bar along the edge that contacts the cabinet. We already notice wear on Kerry's cabinet because the bar rubs the cab there.
For your loose bar all I can suggest is have a look at the latch mechanism itself. The mount holes should have enough room for you to drop the mechanism a bit thereby tightening the bar. _________________ Cliffy
www.passionforpinball.com |
|
Back to top |
|
|
|