View previous topic :: View next topic |
Author |
Message |
metallik
Joined: 03 Aug 2005 Posts: 99
|
Posted: Mon Jun 11, 2007 6:36 am Post subject: Lockdown bar |
|
|
<vulture>
I noticed some people had problems with their lockdown bars... If anyone happens to get a replacement from PMI, I would love to buy your old damaged one... have a Breakshot here that's complete (and very nice) except it is missing the lockdown bar. Thanks! :)
</vulture> |
|
Back to top |
|
|
marspinball
Joined: 02 Aug 2005 Posts: 49 Location: San Diego, CA
|
Posted: Mon Jun 11, 2007 6:13 pm Post subject: |
|
|
I also had some rubbing on the right side. Can another be purchased from IPB?? _________________ BBB #131 |
|
Back to top |
|
|
metallik
Joined: 03 Aug 2005 Posts: 99
|
Posted: Mon Jun 11, 2007 7:30 pm Post subject: |
|
|
I asked Georgianna about one at the pick-up, since I'd emailed Kim last year asking to check for one. She (Georgianna) said they were holding onto the ones they had for the moment to see if they'd need them. SInce a few people have damaged ones, I figure some/all of the remaining new ones may be allocated to them, which is fine by me.. I just need a functional one. SO, if anyone does wind up with a spare, drop me a line It can even be from another Capcom.. just need one that fits the Capcom receiver. It looks to be a fair amount of work to modify things to use another manufacturer's lockdown bar... |
|
Back to top |
|
|
kirklake13
Joined: 21 Jun 2007 Posts: 53 Location: NW New Jersey
|
Posted: Sat Jun 23, 2007 3:16 am Post subject: Data East Lockdown Bar appears to be an exact replacement |
|
|
Bought one some time ago from Marco, paint pattern and color exact, fits like a glove. All I had to do was move the beer seal. _________________ BBB #102 |
|
Back to top |
|
|
|