Big Bang Bar

sellenoff · Joined: 07 Aug 2005 Posts: 101

How many black foam pieces are installed on your machines?
2 ?
3 ?

I know of 2 games (mine and Jon's) that had only 2 pieces installed (left orbit, left side of ray's ball buster).

I also saw Al's game which had a 3rd rubber piece, installed below the Dartz kickout hole. Incidentally Al's rubber was not installed on Ray's ball buster side, but was sitting in the middle of the PF with backing not yet removed.

I'd like to hear from y'all what you got, and I'd like an official TOG answer as to what was supposed to be installed..

CraigC · Joined: 03 Aug 2005 Posts: 209

3. left orbit. left of busters. right of dartz

rhayes1 · Joined: 03 Aug 2005 Posts: 31

2 foam pieces.

According to page 116 in the manual these are No. 12 and 13. No. 12 is to the right of Ray's Ball Buster and No. 13 is at the bottom of the entrance to the left orbit.

Robert Hayes
BBB#18

The Other Guy · Joined: 04 Feb 2006 Posts: 77

Yep, should be three rubber pads. Embarassed

Entrance to LH Outer Orbit, Left side of Ray's Ball Buster & Below UR Flipper.
_________________
"BBB 77"

rhayes1 · Joined: 03 Aug 2005 Posts: 31

How do I get a 3rd piece of the proper foam pad to install below my upper right flipper?

Rob Hayes
BBB #18

BBB94 · Joined: 02 Aug 2005 Posts: 407 Location: WI, USA

I got all three. The middle (RBB one) did not have a sticky front like the other two, so I did not change it.